Orion PNVR508 User Manual Download Page 79

Page: 79 / 111

User's Manual PNVR500 series

Switching the split mode

9.4.1.

Click the Switch button to switch the mode as follows:

<1-split Mode>

<4-split Mode>

<9-split Mode>

<16-split Mode>

To save the video

9.4.2.

Click <

> to start saving.

The video from the selected channel will be saved to the PC in the AVI format. (Default path: C:\SaveFolder)

Click <

> again to stop saving. Click <

> to display the context menu where you can change the saving path.

Print

9.4.3.

Click <

The current screen will be printed with the printer connected to the PC.

Screen capture

9.4.4.

Click <

The current screen of the selected channel will be saved to the path specified in the PC. (Default path:

C:\SaveFolder) Click <

> to display the context menu where you can change the saving path.

Summary of Contents for PNVR508
















































































































Search results

Summary of Contents for PNVR508

Reviews:

Related manuals for PNVR508

Brands by name

Popular brands

Orion PNVR508, User Manual

Search results

Summary of Contents for PNVR508

Reviews:

Related manuals for PNVR508

Brands by name

Popular brands