User's Manual PNVR500 series
47
Detail Status
4.6.6.
You can check the details of the cameras that are
connected to each channel.
Click <
> in the right area of the list to show the
details.
Click <RESET> in the "IP CAMERA CONFIGURATION"
window to reset the IP camera.
When the IP camera settings are complete, click <OK>.
Security
4.6.7.
For security purpose, you can set whether to use encryption and its method, and configure IP filtering.
1.
From <SYSTEM SETUP> - <NETWORK>, select <SECURITY>.
2.
Use the [
▲▼◀▶
/ENTER] buttons on the remote control or use the mouse to select one between
<ENCRYPTION> and <iP FilteR>.
3.
When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen to return to the
previous menu.
ENCRYPTION
4.6.8.
RTSP ENCRYPTION ENABLE : Set whether to
apply RTSP encryption or not.
RTSP ENCRYPTION METHOD : Select the
encryption method.
HTTPS ENABLE : Set whether to use HTTPS
encryption or not.
HTTP AUTHENTICATION METHOD : Select the
authentication method for encrypted
communication.
IP FILTER
4.6.9.
IP FILTER ENABLE : Set whether to apply IP filter or
not.
IP FILTER RULE : You can set to allow or deny IP
addresses listed in the IP filter.
ADD : Click the button to add an IP address to be
filtered, if IP filtering is enabled.
