Orion PNVR508 User Manual Download Page 78

Page: 78 / 111

User's Manual PNVR500 series

9.4.

Live

Live Screen at glance

No.

No. Name

Description

View Selection tab

You can switch to the live, playback and setup screen and check the provided
information.

Live

Display the live screen of the currently connected NVR.

Split Mode

Select and switch to a desired split-screen mode.

Sequence

Set the sequence mode, switch to the next camera, zoom the screen or select the full
screen mode.

Status

Show the connection status of each channel.

Log

Show the log.

PTZ

You can control PTZ cameras connected to each channel. (Only for PTZ cameras.)

Refresh Time

Set the interval at which the NVR Status is refreshed.

Reload

Load the NVR Status immediately.

Voice transmission

With the microphone, your voice will be transmitted to the NVR, or you can turn on
or off the output of the voice signal

Channel

Select a channel listed in the screen.

Save

Save the live video on the screen.

Print out the current screen.

Capture

Capture the selected image.

ActiveX Settings

Configure the ActiveX settings or specify the saving path of the captured image.

Summary of Contents for PNVR508
















































































































Search results

Summary of Contents for PNVR508

Reviews:

Related manuals for PNVR508

Brands by name

Popular brands

Orion PNVR508, User Manual

Search results

Summary of Contents for PNVR508

Reviews:

Related manuals for PNVR508

Brands by name

Popular brands