User's Manual PNVR500 series
44
4.6.
Network Setup
Specify the IP address, DDNS, e-mail, network status and network security.
IP Setup
4.6.1.
Specify the IP address as well as the remote service port.
1.
From <SYSTEM SETUP> - <NETWORK>, select <iP
SetUP>.
2.
Use the [
▲▼◀▶
/ENTER] buttons on the remote
control or use the mouse to specify each item of the
network settings.
> DHCP : If it is checked, set the IP address of the
NVR to Dynamic IP.
- If the <dhcP> item is checked, the sub items of IP
address, gateway, subnet mask, primary DNS server,
secondary DNS server will be filled in automatically.
! If you select to obtain an IP address from the
<DHCP> server, when the lease time of the DHCP
server expires, you will lose connection to the IP
camera momentarily while the network settings will
be updated. However, the network connection will
be restored soon. It is recommended to use a fixed IP
for stable network connection.
> RENEW : The network server restarts and re-
allocates dynamic IP address.
> IP ADDRESS : Provide the IP address.
> GATEWAY : provide the gateway address.
> SUBNET MASK : provide the subnet mask address.
> 1ST DNS SERVER : enter the address of the primary
DNS server.
> 2ST DNS SERVER : enter the address of the primary
DNS server.
> RTSP SERVICE PORT : port number that the remote
client receives the NVR video from.
> WEB SERVICE PORT : port number used for
connecting to the NVR with the web browser.
> PORT FORWARDING : If you are using a router, you
can set the port forwarding so that external access to
the NVR is enabled. If the router does not support
the uPnP protocol, you must set the port forwarding
manually. For more information, contact your
network administrator.
> DELETE PORT : release the port forwarding settings
for the router.
> MAX TX SPEED : limit the network transfer rate to
access a remote client. The video signal may be
transferred at a less rate than specified, which
depends on the status of your network connection.
3.
To apply the change, click <APPLY> in the bottom of
the screen.
4.
When done, press the [EXIT] button on the remote
control or click <CLOSE> in the lower screen to return
to the previous menu.
