User's Manual PNVR500 series
25
3.
Monitoring
START
1.
Connect the adaptor to the power input port in the
rear panel of NVR.
! Make connection when the power is not applied
yet.
2.
Turn on the power switch in the rear panel of NVR.
With a beep, the logo screen appears several
seconds after the front LED turns on.
3.
When the booting process is completed, the live
screen then the login screen appears.
Log In
To manipulate or access the menus of NVR, you should
have logged in.
1.
When the system starts, the login screen appears.
2.
Select a user and provide the password.
The default password of the "ADMIN" account is
"1234".
3.
Click <ok>.
If the login information is correct and valid, you will
see the live screen.
! For security purpose, change the password before
you use the product for the first time after
purchasing it.
Log Out
To prevent unauthorized access, it is recommended to log
out when you leave the screen.
! Hover the cursor near the bottom of the screen to
display the menu.
1.
In the monitoring screen, click <MENU> in the
bottom left corner of the screen to <LOG OUT>, or
press the [LOG OUT] button on the remote control.
2.
Access to SEARCH / ARCHIVING / SYSTEM SETUP
/RECORD SETUP / SHUTDOWN will be restricted.
System Shutdown
1.
In the monitoring screen, click <Menu> in the bottom
left corner of the screen to <SHUTDOWN> the
system, or press the [POWER] button on the remote
control.
2.
Use the virtual keyboard to enter the password.
3.
Be sure to turn off the power switch in the rear
panel.
! If you turn off the system in an abnormal manner
such as removing the power cord while the system is
in operation, the disk will have or increase the bad
sectors, causing data loss and shortened life cycle of
the disk.
