User's Manual PNVR500 series
76
9.
Web Viewer
9.1.
What is the web viewer?
The Web Viewer is an application software program for a PC (for web browser) that provides user-friendly interface
for easier access and use over the network, to access NVR remotely, view or search live / recorded videos and control
NVR.
9.2.
System Requirements
The following is the minimum hardware and operating system requirements to run Web RA.
Operating System
Windows XP Professional
Windows Vista Home Baisc / Premium
Window 7
Web browsers:
Internet Explorer 7.0 or later/Mozilla Firefox 3.6/Google
Chrome 4.1/Opera 10
Some web browsers other than Internet Explorer may not
fully function
CPU:
Intel Pentium 2.0 GHz
Memory
512 MB
Display
16-bit 1024 x 768 High Color
Hard Disk Drive
50MB (space required for installing the web viewer)
*Additional HDD space is required for saving your
recordings.
The file size of your recording may differ depending on
the specified quality.
9.3.
connection
Open a browser and enter the IP address of NVR, or type the URL in the address bar.
To connect to the nvR from inside
9.3.1.
Check the "network Status" and verify the <IP
ADDRESS> and <WEB SERVICE PORT> of the NVR.
Enter the IP address and web service port in the
address bar of the browser.
Ex) http://192.168.1.200:8080
To connect to the nvR from outside
9.3.2.
Using the iP address
- Check the "network Status" and verify the <EXTERNAL IP ADDRESS> and <WEB SERVICE PORT> ofthe NVR.
- If using a fixed (external) IP, enter the external IP that is specified in the NVR in the address bar of the web
browser. Ex) If the internal IP address is set to "http://222.112.4.48:8080" (192.xxx.xxx.xxx), no access from
outside is allowed.
Using the URL.
- Check the "network Status" and verify the <DDNS ADDRESS> and <WEB SERVICE PORT> of the NVR.
- Enter the DDNS address and web service port in the address bar of the browser.
Ex) http://00115f123456.dvrlink.net:8080
! In a router network, you have to set the "Port Forwarding" and "DMZ Setting" to allow access from outside.
! For the necessary settings of the router, refer to the user manual of the router or contact the manufacturer of the
router
