Orion PNVR508 User Manual Download Page 61

Page: 61 / 111

User's Manual PNVR500 series

Record Setting

You can configure the record settings for the NVR. Only authorized users can access the Record Setup menu.

5.1.

To start the Record Setup menu

5.2.

Record Setup

operation Mode

5.2.1.

You can set the recording options for Auto or Manual mode.
1.

From <RECORD SETUP> menu, select <OPERATION MODE>.

Use the [

▲▼◀▶

] buttons or use the mouse to set <RECORDING CONFIGURATION MODE> to <AUTO

CONFIGURATION> or <MANUAL CONFIGURATION>.

Set the recording options for each selected Record mode.

To apply the change, click <APPLY> in the bottom of the screen.

When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen to return to the
previous menu.

Auto configuration

5.2.2.

If you choose your preferred record mode, the NVR will recommend you the optimized settings for the selected
record mode.

Summary of Contents for PNVR508
















































































































Search results

Summary of Contents for PNVR508

Reviews:

Related manuals for PNVR508

Brands by name

Popular brands

Orion PNVR508, User Manual

Search results

Summary of Contents for PNVR508

Reviews:

Related manuals for PNVR508

Brands by name

Popular brands