User's Manual PNVR500 series
58
Motion Sensor
4.9.9.
You can set an action to execute when a motion is detected.
For the settings of the motion sensor, move to <CAMERA SETUP>.
1.
From <SYSTEM SETUP> - <EVENT>, select <MOTION
SENSOR>.
2.
Use the [
▲▼◀▶
] buttons on the remote control or
use the mouse to specify the ignorance interval and
operation.
IGNORING INTERVAL : Specify the minimum
interval of the motion event occurrence.
For example, even if you have set the minimum
frequency to 5 seconds and another motion
event occurs in less than 5 seconds after the last
motion event occurred, the new event will be
ignored. If too many motion events occur, adjust
to shorten the interval.
! Motion recording will be triggered immediately after the motion occurred regardless of the above settings.
ALARM OUTPUT : Specify the alarm output channel if a motion is detected by the motion sensor.
PRESET : On motion sensor’s detections, the camera moves as defined by the selected preset.
BUZZER : Specify the output of the buzzer if a motion is detected by the motion sensor.
VIDEO POPUP : Select to display the video popup if a motion is detected by the motion sensor.
EMAIL : Select to send an email if a motion is detected by the motion sensor.
FTP : Select whether to upload event notification onto the FTP upon detected motion event.
3.
To apply the change, click <APPLY> in the bottom of the screen.
4.
When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen to return to the
previous menu.
Video Loss
4.9.10.
You can specify a reaction to the case where no video is received from the camera
1.
From <SYSTEM SETUP> - <EVENT>, select <VIDEO
LOSS>.
2.
Use the [
▲▼◀▶
] buttons on the remote control or
use the mouse to specify the reaction to a video loss
ALARM OUTPUT : Specify the alarm output
channel if a video loss occurs.
PRESET : On video loss’s detections, the camera
moves as defined by the selected preset.
BUZZER : Specify the output of the buzzer if a
video loss occurs.
EMAIL : Select to send an email if a video loss
occurs.
FTP : Select whether to upload event notification
onto the FTP upon detected video loss event.
3.
To apply the change, click <APPLY> in the bottom of
the screen.
4.
When done, press the [EXIT] button on the remote
control or click <CLOSE> in the lower screen to return
to the previous menu.
