User's Manual PNVR500 series
41
4.4.
Audio Setup
You can configure audio and signal beeps.
Audio
4.4.1.
You can select the default audio channel and configure network audio transmission
1.
From <SYSTEM SETUP> - <AUDIO>, select < AUDIO >.
2.
Use the [
▲▼◀▶
/ENTER] buttons on the remote
control or use the mouse to select an item that you
want to edit.
> DEFAULT LIVE AUDIO CHANNEL : select an audio
channel to monitor on the live screen.
> NETWORK AUDIO TRANSMISSION : decide if NVR
transfers the audio signal to the remote client.
> RECEIVE NETWORK AUDIO : decide if NVR receives
the audio signal from the remote client.
3.
To apply the change, click <APPLY> in the bottom of
the screen.
4.
When done, press the [exit] button on the remote
control or click <CLOSE> in the lower screen to return
to the previous menu.
Buzzer output
4.4.2.
You can set to output the buzzer if you manipulate the remote control
1.
From <SYSTEM SETUP> - <AUDIO>, select <BUZZER>.
2.
Use the [
▲▼◀▶
/ENTER] buttons on the remote
control or use the mouse to select an item that you
want to edit.
> REMOTE CONTROL : specify the output of a beep
when you press a button on the remote control.
3.
To apply the change, click <APPLY> in the bottom of
the screen.
4.
When done, press the [EXIT] button on the remote
control or click <CLOSE> in the lower screen to return
to the previous menu.
