Orion PNVR508 User Manual Download Page 32

Page: 32 / 111

User's Manual PNVR500 series

To select an audio output channel

You can select a camera outputting the voice signal from
the microphone that is connected to NVR.

To check the alarm status

You can check the alarm status of each camera.
Click <OK> to close the window.

To check the network status

You can check the network connection status.
Click <OK> to close the window.
ν For more information, refer to "Network Status".

To check the disk status

You can check the storage space of the current disk and
check also if there is any problem with the disk.
Click <OK> to close the window.
ν For more information, refer to "Disk Information".

Saving Captured Snapshots

You can capture the current video screen and save or
export to a connected storage device.

Select a channel fi rst, and right click to open popup
menu, and select <SNAPSHOT> menu item, or press
the [SNAPSHOT] button of the remote control.

Summary of Contents for PNVR508
















































































































Search results

Summary of Contents for PNVR508

Reviews:

Related manuals for PNVR508

Brands by name

Popular brands

Orion PNVR508, User Manual

Search results

Summary of Contents for PNVR508

Reviews:

Related manuals for PNVR508

Brands by name

Popular brands