![background image](http://html1.mh-extra.com/html/omron/nt620c/nt620c_operation-manual_744559101.webp)
3-8
Section
Various System Settings
88
Set the resume function by using the menu operation from the System Menu as
shown below.
Select “Maintenance Mode”.
SYSTEM MENU
Quit
Transmit Mode
Maintenance Mode
Expansion Mode
V0.0
Select “Memory Switch”.
MAINTENANCE MENU
Quit
Display History
I/O Check
Memory Switch
PT Settings
Init. Memory
Comm. Method Host Link
Host Link Speed 9600bps
MEMORY SWITCH MENU
Quit
Key Press Sound
ON
Buzzer Sound
ON
Screen Saver
None
Resume Function ON
Printer
ESC/P TONE
Each time the “Resume
Function” touch switch is
pressed, the setting option
“ON” alternates with
“OFF”.
To set and quit the menu, press the “Quit” touch switch. The setting made last will
be set and the display will return to the “MAINTENANCE MENU”.
S
OFF: The resume function will be disabled and the memory table will be
initialized when the power to the NT620S/620C is turned on or reset or
when the mode is switched to the “RUN” mode.
S
ON:
The resume function will be enabled and the memory table will not be ini
tialized. When the NT620S/NT620C starts operation, the contents of
the memory tables are written to the allocated words in the PC.
Summary of Contents for NT620C
