Omron NT620C, Operation Manual

Page: 265 / 337

6-3 Section Commands/Responses
254
1 : Present, SET attribute
2 : Absent, AND attribute
3 : Present, AND attribute
4 : Absent, OR attribute
5 : Present, OR attribute
6 : Absent, XOR attribute
7 : Present, XOR attribute
8 : Absent, SET attribute (writing 1 word)
9 : Present, SET attribute (writing 1 word)
c
1
to c
4
: First word No. written (4 BCD digits)
0000 to 9999
I
1
, I
2
: Number of words written (2 BCD digits)
01 to 50 : 1 to 50 words
If m is 8 or 9, omit this setting.
d1
1
to d1
m
, ..., dn
1
to dn
m
:
Data of written words (1 to 4 hexadecimal digits)
0 to FFFF
It is possible to omit initial zeroes so that there are less
than 4 digits.
Individual words of data are delimited by commas.
s
1
, s
2
: Check sum (2 hexadecimal digits)
If m is an even number, omit this setting.
Response
Only if “Yes” is set for the “Response” memory switch, the response indicated
below is returned on normal completion.
Format
4D 30 30 31 46 1B 57
M 0 0 s
1
s
2
[ESC] W
0D
[CR]
s
1
, s
2
: Check sum (2 hexadecimal digits)
This is always added (fixed as “1F”).
Function
S
Writes the data of the specified number of words starting from the specified
word in the PT memory. The result after executing the specified operation
(write
attribute) on the present contents of the PT the PT memory and the written data
is written.
S
A maximum of 50 words can be written at one time.