Omron NT620C, Operation Manual

Page: 270 / 337

6-3 Section Commands/Responses
259
s
1
, s
2
: Check sum (2 hexadecimal digits)
If m is 0, omit this setting.
Response
Only if “Yes” is set for the “Response” memory switch, the response indicated
below is returned on normal completion.
Format
53 30 30 31 31 1B 43
S 0 0 s
1
s
2
[ESC] C
0D
[CR]
s
1
, s
2
: Check sum (2 hexadecimal digits)
This is always added (fixed as “11”).
Function
S
Initializes all the character string memory tables within the range specified by
the “first cleared character string memory table number” and “final cleared
character string memory table number” to the value set with the support tool.
S
If settings are omitted for both the “first cleared character string memory table
number” and the “final cleared character string memory table number”, all the
character string memory tables are cleared. It is not possible to omit just one of
these settings.
Touch switch input notify command (Sent from PT to host)
Command
Format
54 * * * * * * 1B 53 * *
T c
3
c
4
d
1
[ESC] S d
2
a
1
a
2
s
2
[CR] d
3
* * * * * * 0D * *
s
1
* *
a
3
* *
* * * *
c
1
c
2
a
4
* *
d
4
* *
c
1
to c
4
: Changed word number (4 BCD digits)
0000 to 9999
This is the number of the word containing the allo-
cated bit of the touch switch at which there has been a
change.
d
1
to d
4
: Contents of the word after the change
(4 hexadecimal digits)
0000 to FFFF
a
1
to a
4
: Changed bit information (4 hexadecimal digits)
0000 to FFFF
The changed bit in the “contents of the word after the
change” is set to “1”.
s
1
, s
2
: Check sum (2 hexadecimal digits)
This is always added.