Omron NT620C, Operation Manual

Page: 119 / 337

3-9 Section System Maintenance
106
DIP SWITCH CHECK
1. Forced initialization of screen data Ineffective
2. System Reserved (always ON)
3. System Menu display
Displayed
4. Automatic return at comm. error Performed
5. Not used
6. Not used
7. Not used
8. Erase System Program
ineffective
1 2 3 4
ON
OFF
5 6 7 8
End
S
After checking the DIP switch statuses, press the “End” touch switch.
Note Always switch off the power to the NT620S/NT620C before changing DIP switch
settings.
Checking the Screen Memory
Check the screen memory by using the menu operation from the System Menu
shown below.
Note When a screen memory check is performed, the screen memory is initialized
and all the screen data is cleared. Check that the data has been backed up by
using the support tool.
Select “Maintenance Mode”.
SYSTEM MENU
Quit
Transmit Mode
Maintenance Mode
Expansion Mode
V0.0