![background image](http://html1.mh-extra.com/html/omron/nt620c/nt620c_operation-manual_744559174.webp)
4-8
Section
Numeral Setting
162
Allocation of Ten-key
Ten-key can be allocated to the touch switches.
Specify the numeric keys to be allocated to touch switches when creating the
touch switches. For numeral settings, the following numeric keys (system keys)
can be used.
For creation of the touch switch, refer to the 4-7 “Touch Switches” (page 151).
Ten-key
Ten-key
Ten-key
(system key)
0
A
"
1
B
#
2
C
z
3
D
!
4
E
5
F
6
CLR
7
+/–
8
.
MENU
9
HOME
*
“MENU” means the system menu display.
When any touch switch allocated to the ten-key and system key in the numeral
setting screen is pressed, it will not be notified to the PC.
4-8-4 How to Use Ten-Key Type
In order to enter the numeral values using the ten-key type, the numeral setting
input column subject to entry is specified to be ready for input operation before
entering the numeral values using the ten-key.
Specifying the Numeral Setting Input Column to be Entered
The numeral setting input column to be entered is specified by either ten-key,
system key, or touch switch (cursor moving key).
The frame (cursor) around the specified numeral setting input column and the
cursor attributes can be specified.
•
Specifying the column using the ten-key
The numeral setting input column is specified with the HOME,
,
,
,
keys out of the ten-keys. A cursor can be moved between the numeral setting
input columns by these keys as shown below.
6563
4568
5107
3200
0000
4624
HOME
←
↑
↓
→
When the HOME key is pressed, the cursor can be moved at a stretch to an
area at the upper left corner where a sum of XY coordinates is at a minimum
(the numeral setting input column at the upper left in the example above).
Summary of Contents for NT620C
