3-8
Section
Various System Settings
86
The factory setting is not fixed.
Select “Maintenance Mode”.
SYSTEM MENU
Quit
Transmit Mode
Maintenance Mode
Expansion Mode
V0.0
Select “Memory Switch”.
The “screen OFF/backlight
OFF” switch is for the
screen saver function in the
case of the NT620S
memory switches and for
the backlight OFF function
in the case of the NT620C
memory switches.
MAINTENANCE MENU
Quit
Display History
I/O Check
Memory Switch
PT Settings
Init. Memory
Comm. Method Host Link
Host Link Speed 9600bps
MEMORY SWITCH MENU
Quit
Key Press Sound
ON
Buzzer Sound
ON
Screen Saver
None
Resume Function ON
Printer
ESC/P TONE
Each time the “Screen
Saver” touch switch is
pressed, the setting op-
tion will switch among “10
minutes”, “1 hour”, and
“None”.
To set and quit the menu, press the “Quit” touch switch. The setting made last will
be set and the display will return to the “MAINTENANCE MENU”.
S
None:
The Screen Saver function is not used. As long as no operation is
performed, the same screen remains to be displayed.
S
10 minutes: The screen will be turned off when no operation has been
performed for 10 minutes.
S
1 hour:
The screen will be turned off when no operation has been
performed for 1 hour.
Summary of Contents for NT620C
