4-3
Section
Screen Display
130
- Parent screen: No. 8
- Child screens: No. 10, No. 7, and No. 25
When screen No. 8 is designated, screen No. 8 becomes the parent screen and
the child screens No. 10, No. 7, and No. 25 are displayed over the parent screen
in that order.
Only one numeral setting screen or character-string setting screen (screens
which allow numeral and character-string input on the NT620S/NT620C screen)
can be registered as a child screen. For details on numeral settings, see Section
4-8 “Numeral Setting” (page 157), and for details on character-string settings,
see Section 4-9 “Character-String Setting” (page 168).
Make sure that the touch switches and numbers set in the normal screens do not
overlap in an overlapping screen. If the set positions of the touch switches and/or
numbers in the normal screens overlap with each other, such settings may some-
times not be effective as intended. Use the support tool and make sure that the
set positions do not overlap with each other.
Continuous Screens
A group of normal screens which are related in series and can be switched con-
secutively is called the “continuous screens”. Up to eight screens can be regis-
tered to one screen as a group of continuous screens.
The base screen used for registering the continuous screens is called a “parent
screen”, and the registered continuous screens are called “child screens”.
The current screen number and the total number of continuous screens can be
displayed in the top right corner of the screen. This is called the “page number
display”.
The page number is set when creating the screen data by using the support tool.
Refer to the “NT-series Support Tool Operation Manual” (V028-E1-
j
).
With the child screens of continuous screens, all display elements except “nu-
meral setting” and “character-string setting” can be used. The parent screen is
used to register the child screens, and so display elements cannot be registered.
The screen attributes set in the parent screen become effective in the continuous
screens.
[Example continuous screens]
1/3
2/3
3/3
Screen No. 20
Screen No. 15
Screen No. 5
Continuous
screen (1)
Continuous
screen (2)
Continuous
screen (3)
[
↑
] touch switch
[
↑
] touch switch
[O] touch switch
[O] touch switch
- Parent screen: No. 10
- Child screens: No. 20, No. 15, and No. 5
When screen No. 10 (continuous screen) is designated, screen No. 20 which is
page 1 of the continuous screens will be displayed. Screen No. 15 or No. 5 can
be displayed by using the touch switches. Since screen No. 10 has been set for
the continuous screens, that screen cannot be displayed as an individual screen.
Summary of Contents for NT620C
