Omron NT620C, Operation Manual

Page: 169 / 337

4-8 Section Numeral Setting
157
4-7-5 Cursor Moving Key Function
This is a Touch Switch to select the numeric value setting input column (ten-key
type) and the character-string setting input column when entering data. When
the Touch Switch is pressed, a cursor (display frame) is moved to the numeral/
character-string setting input column specified to be ready for input operation
(Refer to 4-8 “Numeral Setting” and 4-9 “Character-String Setting”). The numer-
ic value/character-string setting input column is automatically produced with the
Support Tool. Note that it is also possible to set the pop-up window “open” func-
tion for the same touch switch.
4-7-6 SCREEN PRINT Key Function
When the Touch Switch is pressed, a screen hard copy (screen image) is printed
by a printer connected to the NT620S/620C.
Two kinds of keys can be set: START key that starts the printing operation and
CANCEL key that cancels the printing operation.
Even when the screen hard copy is being carried out, the NT620S/620C contin-
ues operation.
When this key is pressed, screen
hard copy is canceled.
START key CANCEL key
Screen hard copy START key
Screen hard copy CANCEL key
+10
+1
–10 –1
When this key is pressed, screen
hard copy is started.
[Temperature adjustment]
Current temp.: 20
_
C
Set temp.: 25
_
C
4-8 Numeral Setting
The numeral setting is a function to enter the numeral values on the screen. The
numeral setting allows the numeral value to be entered directly from the touch
switch into the numeral memory table, to be displayed in the screen, and further
to be sent to the PC.
The following is a guide to the numeral setting function, a guide to the method for
creating the numeric keys required for numeral settings on the screen, and an
explanation of how to use numeric keys during operations.
Numeral setting screens cannot be registered as child screens of continuous
screens.
In the case of overlapping screens, only one screen can be set as a numeral set-
ting screen.
Caution In order to input numerical values using touch switches, apart from the display
area for the numeral setting, the numeric keys must also be created. For details
on how to create numeric keys, see “Notification of Numbers to the PC” (page
220).
Ensure the safety of the system before changing the monitor data.