![background image](http://html1.mh-extra.com/html/omron/nt620c/nt620c_operation-manual_744559042.webp)
2-3
Section
Connecting to the Support Tool
29
2-3
Connecting to the Support Tool
Connect the NT620S/620C to a computer with an RS-232C cable to transfer the
screen data created by using a support tool to the NT620S/620C.
It is impossible to connect a computer and a PC at the same time to the
NT620S/620C. Connect a computer only to transfer the screen data.
24VDC GR
+
S
Communication conditions
Communication conditions are set when a support tool is started.
S
Recommended connecting cables:
OMRON CV500-CN228 (length: 2 m)
(9-pin D-SUB male
↔
25-pin D-SUB male.)
OMRON XW2Z-S001 (conversion cable)
(25-pin D-SUB female
↔
Half-pitch 14-pin male. Purchase the CV500-CN228
separately.)
OMRON XW2Z-S002 (length: 2 m)
(9-pin D-SUB male
↔
9-pin D-SUB female. For IBM PC/AT or compatible com-
puters.)
Reference
To make a connector cable, refer to Appendix G “Method for Making the Cable
for Connection to the PC” (page 301).
Summary of Contents for NT620C
