Omron NT620C, Operation Manual

Page: 87 / 337

3-5 Section Setting the Conditions of Communications with the PC by Using the Memory Switches
74
3-5-3 Setting Unit Numbers (NT Link 1:N Only)
When using the NT620S/NT620C with the NT link (1:N) communication method,
set unit numbers. When using NT link (1:N), unit numbers are used to identify
each of the multiple PTs connected to a single PC port. Set a different unit num-
ber for each of the PTs connected to the port.
The unit numbers that can be set differ in accordance with the type of host PC as
follows.
C200HE :Unit Nos. 0 to 3
C200HG, C200HX :Unit Nos. 0 to 7
Set the unit numbers by following the menu operation from the System Menu de-
scribed below.
SYSTEM MENU
Quit
Transmit Mode
Maintenance Mode
Expansion Mode
V0.0
MAINTENANCE MENU
Quit
Display History
I/O Check
Memory Switch
PT Settings
Init. Memory
Comm. Method 1:N NT Link
Host Link Speed
MEMORY SWITCH MENU
Quit
Key Press Sound OFF
Buzzer Sound OFF
Screen Saver None
Resume Function OFF
Printer ESC/P TONE