3-8
Section
Various System Settings
84
Set the buzzer sound by the menu operation from the System Menu as shown
below.
Select “Maintenance Mode”.
SYSTEM MENU
Quit
Transmit Mode
Maintenance Mode
Expansion Mode
V0.0
Select “Memory Switch”.
MAINTENANCE MENU
Quit
Display History
I/O Check
Memory Switch
PT Settings
Init. Memory
Comm. Method Host Link
Host Link Speed 9600bps
MEMORY SWITCH MENU
Quit
Key Press Sound
ON
Buzzer Sound
ON
Screen Saver
None
Resume Function ON
Printer
ESC/P TONE
Each time the “Buzzer
Sound” touch switch is
pressed, the setting option
“ON” alternates with “ERR
ON” , “OFF”.
To set and quit the menu, press the “Quit” touch switch. The setting made last will
be set and the display will return to the “MAINTENANCE MENU”.
S
OFF:
The buzzer will not sound at all during the operation.
S
ON:
The buzzer will sound when a command from the PC is given,
the screen attribute has been set, or an error has occurred.
S
ERR ON:
The buzzer will sound only when an error has occurred.
Reference
The buzzer will sound when “Buzzer check” is selected in the Maintenance
Mode regardless of the buzzer setting.
Summary of Contents for NT620C
