February 22, 2023
Regulatory and safety information is provided in the user manual
1043506-0001 Rev. B
1.
Unpack the box. Without tearing the plastic over the UT, lift it out of
the box, unfold the flaps, and slide it out.
2.
Insert the SIM card supplied by your service provider.
3.
Install the battery and completely charge it before using the
terminal.
4.
Assemble the antenna pole. Sections must be assembled in the
correct order with the flexible gooseneck section at the top. Mount
the antenna at the the top of the pole.
Be careful not to cross-thread the connections and avoid using
excessive force when tightening the antenna to the pole
5.
Make sure the modem unit is powered off. Use the RF cable to
connect the antenna and the modem unit.
Note regarding Wi-Fi radiation:
•
Position the modem’s radome away from a person and other
surfaces it is mounted to.
•
Keep a distance of at least 20 cm from the front of the radome
and 2.5 cm from the back of the terminal.
BGAN Patrol Quick Start Guide
