Oce VarioPrint 2105, Manual For Use

Page: 72 / 266

72 Océ VarioPrint 2105 Job manual
How to define the settings for a new job
1
Automatic document feeder: Put the originals face down and in readable
form into the automatic document feeder. Adjust the original guides to the
original paper size.
Glass plate: Put the originals on the glass plate.
2
Select a template.
3
The Job editor opens with the 'Basic settings' menu. All settings are set to the
values defined for this template.
Note:
When you put your originals into the automatic document feeder, the
original size, original sheet orientation and the original document type are
selected automatically (Only for A4 and Letter Standard. Other formats can
only be fed in one feed direction).
The print size and document type are also automatically selected and adapted
to the original settings.
4
To change the settings for the original document, press the key for 'Original'
and go through the 3 menus at the right side of the screen ('Source', 'Sheet' and
'Layout').
5
To change the settings for the print, press the key for 'Print ' and go from top to
bottom through the 5 menus at the right side of the screen ('Target', 'Output',
'Sheet', 'Layout' and 'Image').
6
Set the number of prints with the numeric keys.
Note:
You can set the number of prints at all times during the job definition.
The print feedback area displays the number of prints.