Oce VarioPrint 2105, Manual For Use

Page: 24 / 266

24 Océ VarioPrint 2105 Job manual
The switches of the scan station
The Scan Station
The scan station has the following switches and buttons. You can find these at
the right-hand side of the scan station.
[14] Switches and buttons on the scan station
[14] Switches and buttons on the scan station
Inside the scan station, behind the right-hand door, you find the Océ Smart
Imager. This is a controller that contains all the high-level user interface
software and that stores jobs from the job queue and the mailboxes.
When you turn the scan station on or off with the power switch, the Océ Smart
Imager will also be turned on or off.
Step Action
1 Power switch ( )
The power switch at the rear of the right-hand side cuts and con-
nects the power to the scan station and the Océ Smart Imager
(see below). When you press the power switch (
), the Océ
Smart Imager also turns on or off.
2 On/Off button with orange and green LED ( )
The On/Off button at the front of the right-hand side allows you
to toggle the status of the scan station between the stand-by
mode and the sleep mode. This is only possible if the scan sta-
tion power switch (
) is in '1' position and the startup phase is
passed (templates visible on the screen).
3 Key switch (at the front of the right-hand side)
If you want to prevent that any person switches on the machine
you can take out the key in the OFF position. If you take out the
key in ON position, any person can turn off the machine with the
power switch.