manualshive.com logo in svg

Oce VarioPrint 2105, Manual For Use

Share
Download
Oce VarioPrint 2105 Manual For Use Download Page 21

Introduction

21

The switches of the control station

The Control Station

The scan station starts up the control station. The control station has no 
separate switch to turn on the station.

The monitor of the control station contains a LED that indicates the status of 
the Océ VarioPrint 2105.

[12] System status

[12] System status

LED color

System status

Green

The system is stand-by or processes a job.
The print station of the Océ VarioPrint 2105 may be in 
the low power mode. The screen is on.
One of the two stations, print station or scan station can 
be in sleep mode.

Red

The scan station and the print station are both in the sleep 
mode. The screen is off/black.

Green (blinking)

The Océ VarioPrint 2105 starts up. The screen will re-
main off/black for approximately 2 minutes.

Summary of Contents for VarioPrint 2105











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands