Oce VarioPrint 2105 Manual For Use Download Page 163

Page: 163 / 266

The scan-to-file function

163

Portrait original, short edge feed

■

Hold the original in front of you in readable position.

■

Rotate the original 90 degrees counter-clockwise.

■

Turn the original over the long edge.

■

Place it into the automatic document feeder or on the glass plate.

Landscape original, short edge feed

■

Hold the original in front of you in readable position.

■

Turn the original over the short edge.

■

Place it into the automatic document feeder or on the glass plate.

Note:

If you are scanning an original in which the long edge size is greater

than the vertical glass plate size, you must always use a short edge feed. Long
edge feed does not fit into the automatic document feeder.

Glass plate position

[52] Glass plate position

Note:

If you are scanning an original in which long edge size is greater than

the vertical glass plate size, you must always scan the original in horizontal
position.

Component

Function

[69] Glass plate scan

portrait

[69] Glass plate scan
portrait

Scan a portrait document in vertical position on the glass
plate.

[70] Glass plate scan

landscape

[70] Glass plate scan
landscape

Scan a landscape document in horizontal position on the
glass plate.

Summary of Contents for VarioPrint 2105











































































































































































































































































Search results

Summary of Contents for VarioPrint 2105

Reviews:

Brands by name

Popular brands

Oce VarioPrint 2105, Manual For Use

Search results

Summary of Contents for VarioPrint 2105

Reviews:

Brands by name

Popular brands