Oce VarioPrint 2105, Manual For Use

Page: 174 / 266

174 Océ VarioPrint 2105 Job manual
Change the zoom factor
Introduction
Originals in the automatic document feeder
The automatic zoom function is active when you put standard size originals
into the automatic document feeder. If the size of the image on the original is
different from the size of the target scan value, the information is automatically
resized (reduced or enlarged). By default, the zoom function is set to
'Automatic'. To change the zoom factor manually, use the 'Zoom' function in
the 'Scan', 'Image' menu to change the zoom factor with the star arrow keys
(
).
Originals on the glass plate
If you use non-standard size originals, you must use the glass plate. The
scanner can not automatically detect the size of the originals on the glass plate.
Therefore, you must select the page size and the 'Zoom' factor manually.
The zoom function for the originals in the automatic document feeder is
different from the zoom function for the originals on the glass plate.
[62] Zoom behavior
[62] Zoom behavior
Purpose
You use the 'Zoom' factor to fit the information of the original on the target
scan without loss of information.
Before you begin
Check the result of a zoom action (enlarged or reduced image) on the operator
panel. When the result is satisfactory, you can start the scan-to-file job.
Original Starting point of the zoom function
Automatic document
feeder center
Glass plate Upper left-hand corner