Oce VarioPrint 2105, Manual For Use

Page: 194 / 266

194 Océ VarioPrint 2105 Job manual
About job management on the Océ VarioPrint 2105
Introduction
The job queue view area at the left side of the screen offers you the possibility
to view jobs in the job queue. When you are not in the job editor and the main
screen is active, you can scroll through the job queue if you use the Up and
Down arrow keys (
) at the left side of the screen. To view the settings of a
job in the job queue, press the selection key ( ). You can navigate through
all the menus for the 'Original' and 'Print '. To close this view again, press the
selection key again.
To manage the jobs in the job queue you have to open the 'Job queue manager'
(press the key above the job queue manager). In the job queue you can select a
job with the Up and Down arrow keys (
) and do the following actions.
■
Move a job to the mailbox.
■
Stop after the selected job.
■
Delete the job.
■
Move a job to the top of the job queue.
■
Hold or release the job.
The jobs in the job queue can be
■
if 'Automatic printing' is set to continue, print jobs from the network
■
copy jobs from scanned originals
■
started jobs from the mailbox.
The jobs in the job queue are processed automatically from the top to the
bottom. A job is removed from the job queue when the last sheet is printed and
delivered at its destination.
The priority of print jobs
Remember the following. The print jobs from the network have the lowest
priority. If you start local (interactive print or copy) jobs in the job queue from
the operator panel, these local jobs are printed before the automatic print jobs.