Oce VarioPrint 2105, Manual For Use

Page: 106 / 266

106 Océ VarioPrint 2105 Job manual
Combining Subsets
Combine subsets into one document
Introduction
The Océ VarioPrint 2105 allows you to create your documents and make a
report, a manual or a brochure. Combined (build) documents can include
several parts like a title page, the table of contents, the different chapters and
the appendices. You can scan or print some parts of the document 1-sided and
other parts 2-sided. You can print the different parts of a document on cover
material and separation sheets or tab sheets. You can insert for example
pre-printed paper and blank pages.
Subsets
A subset of a document is a number of pages to process in a defined method,
for example print on red paper. When the required processing method (for
scanning or printing) changes, a new subset begins. When you process parts of
a document in a different way, you must divide the document into subsets.
The set-build key
You can scan different subsets with the set-build key (
). There are two
set-build keys, one on the scan station and one on the operator panel. The two
set-build keys are functionally the same. When you use the set-build key, the
following settings do not apply to the subset, but to the whole job.
■
The number of copies
■
The destination
■
The sort order
■
The staple setting
■
The offset stack.
Remember that you can not use the set-build key for documents in the network
mailbox. When you put different subsets together, the setting 'Source' for
'Original' is automatically set to 'Paper'. The original can come only from the
glass plate or the automatic document feeder.