Oce VarioPrint 2105, Manual For Use

Page: 68 / 266

68 Océ VarioPrint 2105 Job manual
[33] Settings for the print
'Sheet' 'Paper' 'Other'
In this setting you can select 'Size', 'Weight',
'Color' and 'Special front' separately.
('Special front' indicates that the front and the
rear side of a sheet in the paper tray are differ-
ent).
'Special'. In this setting you can select the paper
size, tab sheets, inserts transparencies and 3
special paper types.
In case of a tab sheet you can select to 'Print on
the tab' or not.
'Layout' 'Print ' The setting indicates that a print must be 1-sid-
ed or 2-sided.
'Document
type' The icons show the following.
■
How the information is mapped on the paper
■
The binding edge of a 2-sided document. A
2-sided document can turn on the long edge
or the short edge.
'Margin
shift' This setting indicates the image shift on the
front and the rear side of the print seen from the
binding edge. (see 'Document type')
'Shift to cen-
ter' This setting indicates that the image is put into
the center of the sheet.
'Image' 'Zoom' The zoom range is between 25% and 400%.
'Exposure' You can adjust the settings for light areas and
dark areas on the print independently.
If an area on the print is light grey and you want
it to be white, move the cursor in the 'Light' bar
to white.
If an area on the print is dark grey and you want
it to be black, move the cursor in the 'Dark' bar
to black.
Settings
for 'Print ' Settings Definition