Oce VarioPrint 2105, Manual For Use

Page: 58 / 266

58 Océ VarioPrint 2105 Job manual
Basic Copies
General
Make a copy
Introduction
On the Océ VarioPrint 2105 there are four ways to start a copy job. Each time
the flexibility and the complexity increases. See the table below.
[30] 4 methods to make a copy
[30] 4 methods to make a copy
1
Change settings for every subset.
2
Go back to
1
to define a new subset. When all subsets are scanned, press the
start key.
Description of the 4 methods.
1
The 'Green button' copy.
2
Select a template and change the number of prints.
3
Select a template, change settings of original and print and the number of
prints.
4
Combine different subsets, extended copy.
In this paragraph you find the description of the 1st method.
1 2 3 4
Start key
(
)
Select a tem-
plate Select a template Select a template
Change settings
for original and
print Change settings for
original and print
1
Enter number of
prints
Start key (
)
set-build key ( )
2
Enter number of
prints
Start key (
)
Enter number of
prints
Start key (
)
Print