Oce VarioPrint 2105, Manual For Use

Page: 166 / 266

166 Océ VarioPrint 2105 Job manual
Create a combined scan-to-file job with the Set-build function
1
Divide your document in different sets.
The document is either too large to scan as 1 set or contains sheets of a different
size or paper type.
2
Put the first (set of) original(s) face down in the automatic document feeder or
on the glass plate.
3
Select 'Scan profiles'.
4
Select one of the profiles from the list with scan profiles.
Note:
You can only select 1 scan profile for all the subsets to come.
5
Select 'Edit...' to access the job settings for the scan-to-file job.
(optional: A message appears. Enter the name of the job and confirm the
name. The file name is a combination of data you enter and fixed information
that is defined in the scan profile)
6
You can also skip the 'Edit...' option and press the set-build key ( ). The first
subset is scanned.
7
Repeat the steps for the next subsets and press the set-build key again ( ).
8
When you have scanned the last subset, you can press the start key ( ).
Result
After you start the scan-to-file job, the job is scanned and the digitized result
is sent to the scan server. The file is stored in a designated directory. The file is
stored under the predefined name.
There is no message on the operator panel to inform you that the file was stored
successfully. You can access the status information on the Océ Smart Imager
through the Océ VarioPrint 2105 Settings Editor.