Oce VarioPrint 2105 Page 217 Manual For Use Download

Page: 217 / 266

Maintenance

217

Refill the paper in the paper trays

[75] Refill the paper tray

Step

Action

Remarks

Open the door to the paper com-
partment on the print station.

Press the green 'Down' button at
the left of the paper tray to refill.

The paper tray moves
down.
You can use the green
'Stop' button to stop the
tray before the tray reaches
the lowest position.

Take the paper from the pack.

Discard the top sheet and
the bottom sheet.

Hold each pack of paper at the
two short sides.

Bend the pack.

Put the paper into the paper tray.

Do not slide the paper into
the paper tray.

Press the green 'Up' button at the
left of the refilled paper tray.

The paper tray moves up.

Summary of Contents for VarioPrint 2105











































































































































































































































































Search results

Summary of Contents for VarioPrint 2105

Reviews:

Related manuals for VarioPrint 2105

Brands by name

Popular brands

Oce VarioPrint 2105, Manual For Use

Search results

Summary of Contents for VarioPrint 2105

Reviews:

Related manuals for VarioPrint 2105

Brands by name

Popular brands