Nokia Network Voyager, Reference Manual

Page: 94 / 700

5
Configuring Interfaces
94 Voyager Reference Guide
the idle timer. If the service provider has a minimum charge for each call,
it is recommended the minimum call time be set to this value. The range
is 0-99999. The default value is 120.
13. Click the 64 K
BPS
or 56 K
BPS
radio button in the R
ATE
field in the
C
ONNECTION
I
NFORMATION
table to set the data rate for outgoing calls.
14. Enter values for a remote number and subaddress in the R
EMOTE
N
UMBER
and (optional)
R
EMOTE
S
UB
N
UMBER
edit boxes in the
C
ONNECTION
I
NFORMATION
table.
15.
(Optional) Enter values for a calling number and subaddress in the
C
ALLING
N
UMBER
and
C
ALLING
S
UB
N
UMBER
edit boxes in the
C
ONNECTION
I
NFORMATION
table.
The calling number and subaddress are inserted in a SETUP message
when an outgoing call is made.
Note
The
A
UTHENTICATION
table entries, which follow, allow the user to
manage the parameters used to authenticate both ends of the
communication link.
16. In the T
O
R
EMOTE
H
OST
section of the A
UTHENTICATION
table, in the
N
AME
edit box, enter the name that needs to be returned to a remote host
when it attempts to authenticate this host.
17.
In the
T
O
R
EMOTE
H
OST
section of the
A
UTHENTICATION
table, in the
P
ASSWORD
edit box, enter the password to be returned to the remote host
for PAP authentication, or the secret used to generate the challenge
response for CHAP authentication.
Note
The
T
O
R
EMOTE
H
OST
information must be the same as the
F
ROM
R
EMOTE
H
OST
information (or its equivalent) at the remote end of the
link.