Nokia Network Voyager, Reference Manual

Page: 535 / 700

Voyager Reference Guide 537
3.
Click the
YES
radio button in the
A
LLOW COM
2
LOGIN
field; then click
A
PPLY
.
4.
Click the Modem Configuration link next to the
YES
radio button in the
A
LLOW COM
2
LOGIN
field.
This action takes you to the Modem Configuration page.
5.
Click the
ON
radio button in the
M
ODEM ON
COM2
field to turn on the
modem.
The modem is configured to answer any incoming calls.
6.
Enter a value, in minutes, in the
I
NACTIVITY
T
IMEOUT
field.
This value is the length of time, in minutes, that a connected call on the
modem can remain inactive (that is, no traffic is sent or received) before
the call is disconnected. Setting the value to 0 disables the timer (that is,
the call will never be disconnected due to inactivity).
7.
Enter a value, in minutes, in the
S
TATUS
P
OLL
I
NTERVAL
field to
configure the Modem Status monitor.
This value is the length of time, in minutes, between modem line status
tests. Once every interval, the system tests that the modem is present and
online. If the modem is not detected or is offline, a message is logged
using
syslog . Setting the value to 0 disables the Modem Status monitor.
8. Click the
YES
radio button in the E
NABLE
D
IALBACK LOGIN
field to
enable modem dialback.
When set to Yes, an incoming call on the modem is dropped after you log
in, and the modem automatically calls the
D
IALBACK
N
UMBER
and
connects a login process to the line.
9.
If you enabled modem dialback, enter a value in the
D
IALBACK
N
UMBER
field.
The dialback feature uses this number to back an authenticated user (for
example, 408 555 0093). If dialback is disabled, ignore this value.
10.
Click A
PPLY
.
To make your changes permanent, click S
AVE
.