Nokia Network Voyager, Reference Manual

Page: 334 / 700

6
Configuring Routing
334 Voyager Reference Guide
Configuration of IGP Inbound Filters
1.
Click
C
ONFIG
on the home page.
2.
Click the Inbound Route Filters link in the Routing Configuration
section.
3.
Click the Filter Inbound RIP Routes link.
Note
All other IGPs are configured in exactly the same way.
4. In the A
LL
R
OUTES
A
CTION
field, click either
ACCEPT
or
RESTRICT
. If
you select
ACCEPT
, routes can be rejected individually by entering their
IP address and mask length in the appropriate fields. Similarly, if you
select
RESTRICT
, routes can be accepted individually by entering their IP
address and mask length in the appropriate fields.
5.
If you set
A
LL
R
OUTES
to
ACCEPT
and click A
PPLY
, the
R
ANK
field is
displayed. In the
R
ANK
field you may specify the rank to a value all
routes should have. The range of values is 1-255.
6. Enter the appropriate IP address and mask length in the N
EW
R
OUTE TO
F
ILTER
and M
ASK
L
ENGTH
fields, then click A
PPLY
. A
NEW SET OF
FIELDS IS DISPLAYED ADJACENT TO THE NEWLY ENTERED
IP
ADDRESS
AND MASK LENGTH
.
7.
Select the radio button
ON
or
OFF
to enable or disable filtering of this
route.
8.
From the
M
ATCH
T
YPE
field pulldown menu, select
NORMAL
,
EXACT
,
REFINES
,
or
RANGE
.
9.
In the
A
CTION
field, select the radio button
A
CCEPT
or
R
ESTRICT
to
determine what to do with the routes that match the given filter.
10.
In the Rank field, enter the appropriate value, and then click A
PPLY
.
11. If this completes your actions for this route filtering option, click S
AVE
.