Nokia Network Voyager, Reference Manual

Page: 537 / 700

Voyager Reference Guide 539
9.
If you enabled modem dialback, enter a value in the
D
IALBACK
N
UMBER
field.
The dialback feature uses this number to call back an authenticated user
(for example, 408 555 2186). If dialback is disabled, ignore this value.
10.
Click A
PPLY
.
To make your changes permanent, click
S
AVE
.
Configuring a Modem on COM4 (PCMCIA) (IP500
Series and IP700 Series Network Application
Platforms Only)
1. Click C
ONFIG
on the home page.
2. Click the Network Access and Services link in the Security and Access
Configuration section.
3. To enable the PCMCIA modem card, click the Y
ES
radio button next to
the A
LLOW COM
4 (PCMCIA)
LOGIN
field. Click Apply.
4. Click the Modem Configuration link for the modem card. The modem
status field should read, “Modem Detected.”
5. In the I
NACTIVITY
T
IMEOUT
edit box, enter the time, in minutes, that an
active call on the modem can remain inactive. The default is 0, which
disables the time and means that the call will never be disconnected
because of inactivity.
6.
(Optional) To enable the Dialback feature, click the
Y
ES
radio button in
the
E
NABLE
D
IALBACK
field. When you enable this feature, an incoming
call to the modem is dropped after the user logs in, and the modem
automatically calls the dialback number and connects a login process to
the line.
7. (Optional) In the D
IALBACK
N
UMBER
edit box, enter the dialback number
used by the Dialback feature when calling back an authenticated user.