Nokia Network Voyager, Reference Manual

Page: 647 / 700

Voyager Reference Guide 649
Deleting a User-based Security Model User
This procedure describes how to delete a User-based Security Model (USM)
user.
1.
Click
C
ONFIG
on the home page.
2.
Click the SNMP link. You are now on the SNMP page.Click the Add
USM Users link.
3.
You can either delete a user completely or remove a user’s SNMPv3
functionality but keep that user as an IPSO user.
a.
To delete a user, click the
OFF
radio button next to the name of each
user you want to delete. Click A
PPLY
.
The name of each user and his/her entry disappears from the
SNMP
V
3
U
SERS
list on the SNMP page.
b.
To remove a user’s SNMPv3 functionality but keep that user’s entry,
change the user’s password to one that has fewer than 8 characters but
at least 6 characters long. Enter the user’s current password in the
O
LD
PASSWORD
edit box. Enter a new password that is fewer than 8
characters long but at least 6 characters long in the
N
EW PASSWORD
edit box. Enter the same password that you entered in the
N
EW
PASSWORD
edit box in the N
EW PASSWORD
(
VERIFY
) edit box. Click
A
PPLY
.
The name of the user and his/her entry disappears from the SNMP
V
3
U
SERS
list on the SNMP page. The name of any user whose password
you change to one that has fewer than 8 characters but has at least 6
characters continues to appear on the Password Setting page. To reach
that page, click
C
ONFIG
on the home page and then click the Users
link in the Security and Access Configuration section.
Click A
PPLY
.
4.
Click
S
AVE
to make your changes permanent.