Nokia Network Voyager, Reference Manual

Page: 635 / 700

Voyager Reference Guide 637
4.
(Optional) To enable or change a read-write community string, enter the
name in the
R
EAD
-
WRITE COMMUNITY STRING
edit box. Use
alphanumeric characters without spaces. Click A
PPLY
.
The name of the new read-write community string appears in the current
read-write community string field.
5. To make your changes permanent, click S
AVE
.
Disabling Community Strings
1.
Click
C
ONFIG
on the home page.
2.
Click the SNMP link.
3. To disable a read-only community string, click the
DISABLE
box in the
C
URRENT READ
-
ONLY COMMUNITY STRINGS
field. Click A
PPLY
.
4.
To disable a read-write community string, click the
DISABLE
box in the
C
URRENT READ
-
WRITE COMMUNITY STRINGS
field. Click A
PPLY
.
5.
Click
S
AVE
to make your changes permanent.
Sending SNMP Traps to a Network Management
System
1.
Click
C
ONFIG
on the home page.
2. Click the SNMP link.
3.
Enter the IP address (or the hostname if DNS is set) of a new receiver that
will accept traps from this device in the
A
DD NEW
T
RAP RECEIVER
edit
box. Click A
PPLY
.
4. (Optional) Enter the community string, using alphanumeric characters (do
not use spaces) , for the specified receiver in the
C
OMMUNITY
S
TRING
FOR NEW
T
RAP
R
ECEIVER
edit box. Click A
PPLY
. The default is
community string for the trap receiver is public.