Nokia Network Voyager, Reference Manual

Page: 504 / 700

9
Configuring System Functions
506 Voyager Reference Guide
The new file will appear in the list of database files on this page, but it is not
selected as the current configuration database. The factory default
configuration has not been loaded.
Note
Loading this configuration set will cause all system configurations to be
deleted from the system. You will not be able to configure the system
through Voyager until you have configured an IP address through the
system console.
Loading a Configuration Set
This procedure describes how to switch a currently active database.
1.
Click
C
ONFIG
on the home page.
2.
Click the Manage Configuration Sets link in the System Configuration
section.
3.
Click the radio button in front of the database you want to use; then click
A
PPLY
.
To make your changes permanent, click
S
AVE
.
Deleting a Configuration Set
This procedure describes how to delete unwanted configuration database files.
1. Click C
ONFIG
on the home page.
2.
Click the Manage Configuration Sets link in the System Configuration
section.
3.
Click the Delete Configuration Databases link.
4.
For each database file that you want to delete, click its
D
ELETE
radio
button in the table.
5.
Click A
PPLY
.