Nokia Network Voyager, Reference Manual

Page: 661 / 700

Voyager Reference Guide 663
Creating IPv6 Aggregate Routes
1.
Click
C
ONFIG
on the Home Page.
2.
Click the IPv6 Route Aggregation link in the IPv6 section.
3.
Enter the IPv6 prefix for the new aggregate route in the
P
REFIX FOR
N
EW
A
GGREGATE
edit box.
4.
Enter the mask length (number of bits) in the
M
ASK
L
ENGTH
edit box.
5. Click A
PPLY
.
6. Scroll through the N
EW
C
ONTRIBUTING
P
ROTOCOL
L
IST
and click the
protocol you want to use for the new aggregate route, and then click
A
PPLY
.
7. Click S
AVE
to make your changes permanent.
8. Click the O
N
Radio Button in the C
ONTRIBUTE
A
LL
R
OUTES FROM
<P
ROTOCOL
>
field.
9. (Optional) If you want to specify an IPv6 prefix, enter the IPv6 address
and mask length in the edit boxes in the
P
REFIX FOR
N
EW
C
ONTRIBUTING
R
OUTE FROM
<P
ROTOCOL
>
field.
10. Click A
PPLY
, and click S
AVE
to make your changes permanent.
Creating Redistributed Routes
Redistributing Static Routes into RIPng
1.
Click
C
ONFIG
on the home page.
2.
Click the Route Redistribution link in the IPv6 section.
3.
Click the Static Routes link.
4. To redistribute all currently valid static routes into RIPng, click the O
N
button in the
R
EDISTRIBUTE ALL
S
TATICS IN THE
RIP
NG
field.
5.
Enter a value for the metric cost that the created RIPng routes will have in
the
M
ETRIC
edit box.