Nokia Network Voyager, Reference Manual

Page: 665 / 700

Voyager Reference Guide 667
13.
(Optional) Enter a value for the router advertisement packet’s hop limit
field in the
C
UR
H
OP
L
IMIT
edit box.
14.
(Optional) To specify that the IPv6 prefix can be used for on-link
determination, click the
Y
ES
Radio button in the O
NLINK
F
LAG
field.
15.
(Optional) To specify that the IPv6 prefix can be used for autonomous
address configuration, click the
Y
ES
radio button in the A
UTONOMOUS
F
LAG
field.
16. (Optional) Enter a value (in seconds) for the prefix information option’s
valid lifetime field in the
P
REFIX
V
ALID
L
IFETIME
edit box. This value
represents the length of time—relative to the time the packet is sent—that
the prefix is valid for the purpose of on-link determination.
17.
(Optional) Enter a value (in seconds) for the prefix information option’s
preferred lifetime field in the
P
REFIX
P
REFERRED
L
IFETIME
edit box.
This value represents the length of time—relative to the time the packet is
sent—that addresses generated by the prefix through stateless
autoconfiguration remain preferred.
18.
Click A
PPLY
.
19. Click S
AVE
to make your changes permanent.
Traffic Management
Traffic Management Overview and Configuration
Click the links below to view documentation on Traffic Management features
and how to configure them.
“Configuring Clustering in IPSO”
“Packet Filtering Description”
“Traffic Shaping Description”
“Traffic Queuing Description”