Nokia Network Voyager, Reference Manual

Page: 273 / 700

Voyager Reference Guide 273
Creating a static default route
1.
Use Voyager to connect to Nokia Platform A.
2.
Click
C
ONFIG
on the home page.
3. Click the Static Routes link in the Routing Configuration section.
4. Click the
ON
radio button in the D
EFAULT
field; then click A
PPLY
.
5.
In the
GATEWAY
edit box enter:
192.168.22.1
; then click A
PPLY
.
You should now have one static default route in your routing tables on Nokia
Platform A. In order for the rest of the network to know about this route, you
must redistribute the static route to OSPF. After completing this task, any
gateway connected to Nokia Platform B has the default route with
192.168.22.1 as the nexthop in the routing tables. Any packet not destined for
the 192.168.22.0/22 net is directed towards 192.168.22.1.
Creating a static route (non-default)
1. Click C
ONFIG
on the home page.
2.
Click the Static Routes link in the Routing Configuration section.
3.
In the
N
EW
S
TATIC
R
OUTE
edit box enter:
192.168.24.0
.
4.
In the
M
ASK
L
ENGTH
edit box enter:
24.
5. In the G
ATEWAY
edit box enter:
192.168.26.70;
then click A
PPLY
.
If you have configured OSPF or RIP on your remote office network, you now
have connectivity to the Internet.
Disabling a static route
1.
Click
C
ONFIG
on the home page.
2. Click the Static Routes link in the Routing Configuration section.
3.
Click the
OFF
radio button for the route you want to disable; then click
A
PPLY
.