Nokia Network Voyager, Reference Manual

Page: 595 / 700

Voyager Reference Guide 597
Proposal and Filters
1.
Under the
P
ROPOSALS
table, enter a name for a new proposal in the
N
EW
P
ROPOSAL
edit box. Select either the ESP or AH button.
Note
If the AH button is selected, the
E
NCRYPTION
A
LG
(algorithm) must
always be set to NONE. If this is not done, an error message is displayed
when you click
A
PPLY
.
From the pulldown menu in the A
UTHENTICATION
A
LG
and E
NCRYPTION
A
LG
fields, select the necessary algorithms. Click A
PPLY
.
2. Under the F
ILTERS
table, enter a new filter name in the N
EW
F
ILTER
edit
box for the sub-network that you want to control. Enter the subnet address
and the mask length in the
A
DDRESS
and
M
ASK
L
ENGTH
edit boxes.
Click A
PPLY
.
Note
Destination filters across multiple rules (tunnel or transport) should not
overlap though source filters can overlap.
After clicking A
PPLY
, the new filter information is added to the Filters
list. If needed, you can then define a protocol and/or a port. Defaults are
assumed. Repeat this operation for as many networks as needed.
Note
Each Voyager page displays a maximum of 10 proposals and/or 10 filters.
If you create more than 10, they are continued on new pages. Access
these pages by clicking the link directly below the appropriate section.
The link to more pages appears only after you create more than 10
proposals or filters.