Nokia Network Voyager, Reference Manual

Page: 422 / 700

7
Configuring Traffic Management
424 Voyager Reference Guide
Configuring Security Parameters for a COPS Client ID
The Nokia implementation lets you configure send and receive key IDs for
each COPS Client ID to authenticate sessions with the PDP, or policy server.
1.
Click either
C
ONFIG
on the Voyager home page or click the Traffic
Management link on the home page.
2.
Click the COPS link in the Traffic Management section.
3.
In the
C
ONFIGURED
COPS M
ODULES
section click the Diffserv PIB
link. This action takes you to the COPS Diffserv specific configuration
page.
4. In the COPS
SECURITY CONFIGURATION
section, click on the link for the
name of the COPS Client ID for which you want to configure security.
This action takes you to the COPS Security Configuration page for that
client.
5.
In the
S
EQUENCE
N
UMBER
edit box, enter a value between 1 and
2147483647 to define the sequence number used for the COPS protocol.
Click
A
PPLY
.
6.
In the
K
EY
ID
field, enter a value between 1 and 2147483647 in the
S
END
edit box to define the send key ID used for the COPS protocol.
7.
In the
K
EY
field, enter a string value of up to 64 characters in the edit box
next to the
S
END
K
EY
ID
value. This value defines the key used for the
COPS protocol. Use alphanumeric characters only. Click A
PPLY
.
8.
In
K
EY
ID
field, enter a value between 1 and 2147483647 in the
R
ECV
edit box to define the receive key ID used for the COPS protocol.
9.
In the
K
EY
field, enter a string value of up to 64 characters in the edit box
next to the R
ECV
K
EY
ID value. This value defines the key used for the
COPS protocol. Use alphanumeric characters only. Click A
PPLY
.
Note
You can configure up to 5 receive key IDs.