Nokia Network Voyager, Reference Manual

Page: 597 / 700

Voyager Reference Guide 599
7.
If you are asked to enter URL information of the certificate, enter the
URL to the certificate. Examples are:
!
http://test.acme.com/dev1.cert
!
ftp://test.acme.com/dev1.cert
! file://tmp/dev1.cert
!
1dap://test.acme.com/cn=dev1.acme.com?pem_x509?sub
Enter the HTTP realm information (only for the HTTP protocol); enter
the user name and password if needed to connect to the FTP/HTTP server.
Click
A
PPLY
. This action should print a Success message. Click on the
link titled IPsec General Configuration page to return to the main IPsec
Configuration page.
Repeat the steps in this section for every trusted CA certificate that needs
to be installed.
Note
On successful completion, you will see a green button under the
C
ERTIFICATE
F
ILE
column. The green button indicates the certificate file
is present on the machine and it is also a link to view the installed
certificate.
Device Certificates
A device certificate will be used to identify a particular IPsec system.
Follow the steps below to enroll and install a device certificate.
1.
Under the
D
EVICE
C
ERTIFICATES
table, enter a name in the
N
EW
C
ERTIFICATE
edit box. Click A
PPLY
.
2.
An Apply Successful message is displayed and the name of the CA you
just entered is displayed in the Device Certificates table.
3.
Click on the new link with the same name you entered in Step 1.
This action takes you to the IPsec Certificate Enrollment page for that
named item.