Nokia Network Voyager, Reference Manual

Page: 330 / 700

6
Configuring Routing
330 Voyager Reference Guide
Note
Make sure that the Corporate net RIP router is advertising RIP on the
interface connected to the Nokia network. It must be receiving and
transmitting RIP updates. Nokia does not currently support the notion of
trusted hosts for authentication of RIP routes.
1. Connect to Nokia Platform A using Voyager.
2.
Click
C
ONFIG
on the home page.
3.
Click the Route Redistribution link under the Routing Configuration
section.
4.
Click the RIP link under the Redistribute to OSPF External section.
5.
If you want to redistribute all routes, click the
A
CCEPT
radio button in the
A
LL
RIP
ROUTES INTO
OSPF E
XTERNAL
field.
(Optional) To change the cost metric for RIP Routes into OSPF Externals.
Enter the new cost metric in the
M
ETRIC
edit box, then click A
PPLY
.
6.
If you want to prevent 192.168.22.0/24 and other more specific routes
from being redistributed into OSPF External, define a route filter to
restrict only this route as follows:
a.
To configure this filter, we add
192.168.22.0
in the
N
EW
IP
PREFIX
TO REDISTRIBUTE
entry box, and
24
in
M
ASK LENGTH
entry box.
Click A
PPLY
.
b.
Select
NORMAL
in the
M
ATCH TYPE
pulldown menu. This specifies
that we want routes that are equal or more specific than
192.168.22.0/
24
.
c. Click A
PPLY
. The filter is fully configured.