NF ZM2371, Instruction Manual

Page: 52 / 255

3.5 Basic Operations
3-22 ZM2371/ZM2372

Selection of measurement parameters

Selection of primary parameter
Press the
_ Pri _
key to display the primary parameter selection menu (see below), and select
a primary parameter with a numeric key. Also, the measurement parameters (primary
and secondary) can be selected automatically.
For details

“3.5.5.1 Selection of Primary Parameter”
P r i m a r y pa r a m e t e r : C A u t o : O F F
Current setting
0)Auto OFF 1)ON 2)L 3)C 4)R 5)Z 6)Y 7)G
Options
If either L, C, or R is selected, the equivalent circuit selection menu is displayed.

Selection of primary parameter equivalent circuit
For the L, C, and R, specify the equivalent circuit additionally.
Press the
_ CKT _
key to display the equivalent circuit selection menu (see below), and
select Parallel (suffix p) or Series (suffix s) with a numeric key. Automatic selection is also
possible.
For details

“3.5.5.2 Setting the Equivalent Circuit”
E q u i v a l e n t C K T : S e r i e s A u t o : O F F
Current setting
0 ) A u t o O F F 1 ) O N 2 ) P a r a l l e l 3 ) S e r i e s
Options

Selection of secondary parameter
Press the
_ Sec _
key to display the secondary parameter selection menu (see below), and
select a secondary parameter with a numeric key. The options can be switched to those on
the second page with the
_ EXP _ | [NEXT]
key.
For details

“3.5.5.3 Setting the Secondary Parameter”
S e c o n d a r y pa r a m e t e r : D
Current setting
0)Q 1)D 2)

3)X 4)B 5)Rs >NEXT
Options (First page)
6)Rp 7)G 8)Lp 9)Rdc <PREV
Options (Second page)
_ CKT _ _ Pri _ _ Sec _