NF ZM2371, Instruction Manual

Page: 191 / 255

5.6 Command Explanation
5-64 ZM2371/ZM2372
[:SENSe][:FIMPedance]:RANGe:AUTO {ON|OFF|1|0}
[:SENSe][:FIMPedance]:RANGe:AUTO?
Description: Sets/queries automatic switching of measurement range.
Parameters: {ON|1} Enables automatic switching of measurement range.
{OFF|0} Disables automatic switching of measurement range, and
fixes the range (HOLD).
Setting example: :RANG:AUTO ON
Sets so as to enable automatic switching of measurement range.
Response: {1|0}
Query example: :RANG:AUTO?
Response example: 1
Automatic switching of measurement range is enabled.
Remarks:
Automatic switching of measurement range is automatically disabled if
specific range is set by panel operation or remote control.
[:SENSe][:FIMPedance]:RANGe[:UPPer] <range>
[:SENSe][:FIMPedance]:RANGe[:UPPer]?
Description: Sets/queries the measurement range. The range is specified in
impedance.
Parameters: <range>
{numeric value, range 100E-3|1|10|100|1E+3|10E+3|100E+3|1E+6,
unit:
 }.
As suffix, M (10
-3
), K (10
+3
), MEG (10
+6
) can be used.
As unit, OHM can be used. MAX / MIN can be used.
Parameter example: 10K (= 10E+3), 100OHM (= 100).
If an out-of-range value is set, it becomes minimum or maximum value.
If an arbitrary value is given, the range suitable for measuring that
value is set.
Range

Measurement range
1M 
≦
Parameter
 1M

100k 
≦
Parameter  < 1M 

100k 
10k

≦
Parameter

< 100k


10k 
1k 
≦
Parameter  < 10k 
 1k

10  < Parameter  < 1k   100 
1

< Parameter

≦
10


10 
100m  < Parameter 
≦
1 

1 
Parameter 
≦
100m 
 100m 
Setting example: :RANG 10E+3
Sets the measurement range to 10k
 .
Response: {numeric value, format NR3}
Query example: :RANG?
Response example: +1.04
The measurement range is 1.04  (10k  ).