NF ZM2371, Instruction Manual

Page: 207 / 255

5.7 Status System
5-80 ZM2371/ZM2372
Table 5
–6 Contents of operation condition register and event register
Bit Weight
Content of condition register
(“1” when specified status is fulfilled)
Content of event register
(Condition for setting to “1”)
－
－
－
15
14
13
32768
16384
8192
Always at 0 (unused) Always at 0
－
12
4096 Always at 0 (unused)
Always at 0
－
11
2048 Always at 0 (unused) Always at 0
BUF3 10
1024 BUF3 is full BUF3 becomes full
BUF2 9
512 BUF2 is full BUF2 becomes full
BUF1 8
256 BUF1 is full BUF1 becomes full
CORR 7
128
Either OPEN, SHORT, or LOAD
correction is being measured Correction measurement
completed
WARM 6
64 Always at 0 (unused) Always at 0
WTRG 5
32
Trigger waiting Device waits for trigger
MEAS 4
16
Measuring (/EOM signal of
handler interface is on high level)
Measurement completed
SWE 3
8
Signal acquiring (/INDEX signal
of handler interfaced is on high
level)
Signal acquisition completed
RANG 2
4
Range switching by automatic
range selection function Measurement range has been
established
SETT 1
2
Signal settling
(trigger is being delayed) Signal has settled
(trigger delay finished)
－
0
1
Always at 0 (unused) Always at 0